srp600a thru srp600k 50v-800v 6.0a 1 of 2 web site: www.taychipst.com features e-mail: sales@taychipst.com maximum ratings and electrical characteristics m e c h a n i c a l d a t a fast switching plastic rectifier plastic package has underwriters laboratory flammability classification 94v-0 high surge current capability construction utilizes void-free molded plastic technique fast switching for high efficiency high temperature soldering guaranteed: 250c/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension case: void-free molded package body terminals: plated axial leads, solderable per mil-std-750, method 2026 polarity: color band denotes cathode end mounting position: any weight: 0.07 ounce, 2.1 grams ratings at 25c ambient temperature unless otherwise specified. srp srp srp srp srp srp symbols 600a 600b 600d 600g 600j 600k units maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 volts maximum rms voltage v rms 35 70 140 280 420 560 volts maximum dc blocking voltage v dc 50 100 200 400 600 800 volts maximum average forward rectified current 0.375" (9.5mm) lead length at t a =55c i (av) 6.0 amps peak forward surge current 8.3ms single half sine-wave superimposed on i fsm 300.0 amps rated load (jedec method) maximum instantaneous forward voltage at 6.0a v f 1.3 volts maximum dc reverse current t a =25c 10.0 m a at rated dc blocking voltage t a =100c i r 1.0 ma maximum reverse recovery time (note 1) t rr 100 100 150 150 200 200 ns typical junction capacitance (note 2) c j 300.0 pf typical thermal resistance (note 3) r q ja 10.0 c/w operating junction temperature range t j -50 to +125 c storage temperature range t st g -50 to +150 c notes: (1) reverse recovery test conditions: i f =0.5a, i r =1.0a, i rr =0.25a (2) measured at 1.0 mhz and applied reverse voltage of 4.0 volts (3) thermal resistance from junction to ambient at 0.375 (9.5mm) lead length, with both leads equally to heat sink
ratings and characteristic curves srp600a thru srp600k 2 of 2 e-mail: sales@taychipst.com web site: www.taychipst.com 020406080100 0.01 0.1 1 10 20 40 60 80 100 120 140 160 180 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 75 80 85 90 95 100 105 110 115 120 125 0 4 8 12 16 20 110100 100 150 200 250 300 350 400 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 5.0 10 15 20 25 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0.1 1 10 100 fig. 1 - forward current derating curve ambient temperature, c average forward current, amperes fig. 4 - typical instantaneous forward characteristics peak forward surge current, amperes number of cycles at 60 h z fig. 3 - maximum non-repetitive peak forward surge current r q jl, thermal resistance from junction to lead,c/w fig. 2 - forward current derating curve lead temperature, c fig. 5 - typical reverse characteristics average forward current, amperes 8.3ms single half sine-wave (jedec method) t j =25c instantaneous forward current, amperes t j =25c pulse width=300 m s 1% duty cycle instantaneous forward voltage, volts capacitive loads 5.0 = i pk /i av 10 20 resistive or inductive load l=0.12(3.2mm) t j =25c resistive or inductive load l=0.25(6.3mm) l=0.375(9.5mm) l=0.62(15.9mm) instantaneous reverse current, microamperes percent of rated peak reverse voltage, % t j =125c t j =50c t j =100c fig. 6 - typical thermal resistance equal lead lengths to heat sink, inches i pk /i av = p l=lead length l=lead length copper heatsinks 1.6 x 1.6 x 0.04 (40 x 40 x 1mm) copper heat sinks 1.1 x 1.1 (30 x 30mm) copper pads srp600a thru srp600k 50v-800v 6.0a fast switching plastic rectifier
|
